White Rodgers 1F95-0680 Emerson Blue 6" Programmable Commercial Thermostat Installation Instruction

Blue Commercial Thermostat with

Automatic Heat/Cool Changeover

Option and Damper Control

Model

Programming Choices

1F95-0680

7 Day

5/1/1 Day

Non-Programmable

Single Stage, Multi-Stage, Heat Pump

Installation and Operating Instructions for Model:

APPLICATIONS

THERMOSTAT APPLICATION GUIDE

1F95-0680 Commercial Thermostat

SPECIFICATIONS

To prevent electrical shock and/or equipment damage,
disconnect electric power to system at main fuse or
circuit breaker box until installation is complete.

CAUTION

Save these instructions for future use!

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
CAREFULLY BEFORE INSTALLING OR OPERATING THIS
CONTROL COULD CAUSE PERSONAL INJURY AND/OR
PROPERTY DAMAGE.

Description
Heat Pump (No Aux. or Emergency Heat)

Yes

Heat Pump (with Aux. or Emergency Heat)

Yes

Systems with up to 4 Stages Heat, 2 Stages Cool

Yes

Heat Only Systems

Yes

Millivolt Heat Only Systems – Floor or Wall Furnaces

Yes

Cool Only Systems

Yes

Gas or Oil Heat

Yes

Electric Furnace

Yes

Hydronic (Hot Water) Zone Heat – 2 Wires

Yes

Hydronic (Hot Water) Zone Heat – 3 Wires

Yes

Wired Remote Temperature Sensor (Indoor or Outdoor)

Yes

Dual Fuel Feature (Heat Pump Mode, Outdoor Remote

Required) or Damper Control Feature

Yes

ATTENTION: MERCURY NOTICE
This product does not contain mercury. However, this prod-
uct may replace a product that contains mercury.

Mercury and products containing mercury must not be
discarded in household trash. Do not touch any spilled
mercury. Wearing non-absorbent gloves, clean up any
spilled mercury and place in a sealed container. For proper
disposal of a product containing mercury or a sealed
container of spilled mercury, place it in a suitable shipping
container. Refer to

www.thermostat-recycle.org for loca-

tion to send product containing mercury.

Index

Page

Installation

Wiring Diagrams

Thermostat Quick Reference

Installer Configuration Menu

Operating Your Thermostat

Programming

Troubleshooting

Electrical Rating:

Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . mV to 30 VAC, NEC Class II, 50/60 Hz or DC

Input-Hardwire  . . . . . . . . . . . . . . . . . . . . . . . . .   20 to 30 VAC
Terminal Load  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   1.5A per terminal, 2.5A maximum all terminals combined
Setpoint Range  . . . . . . . . . . . . . . . . . . . . . . . . . . . .   45 to 99°F (7 to 32°C)
Differential (Single Stage)  . . . . . . . . . . . . . . . . . . . .   Heat 0.6°F; Cool 1.2°F
Differential (Multi-Stage)  . . . . . . . . . . . . . . . . . . . . .   Heat 0.6°F; Cool 1.2°F
Differential (Heat Pump)  . . . . . . . . . . . . . . . . . . . . .   Heat 1.2°F; Cool 1.2°F
Operating Ambient. . . . . . . . . . . . . . . . . . . . . . . . . .   32°F to +105°F (0 to +41°C)
Operating Humidity  . . . . . . . . . . . . . . . . . . . . . . . . .   90% non-condensing max.
Shipping Temperature Range  . . . . . . . . . . . . . . . . .   -40 to +150°F (-40 to +65°C)
Dimensions Thermostat. . . . . . . . . . . . . . . . . . . . . .   4.2"H x 6.4"W x 1.7"D

PART NO. 37-6819B

Replaces 37-6819A

1345