West Elm Pivot Storage Bed King & Queen Assembly Instruction
pivot storage bed king & queen
assembly instructions
-09.24.09
Page 8 of 8
11. Turn the assembled metal slats frame upright with a helper and attach the hydraulic arms (K) to the side
at washers (15). Tighten with phillips head screwdriver.
12. To close the storage bed, open the latches on the footboard and pull the metal slats frame down and lock
latches as shown below. To open the storage bed, open the latches and pull metal slats frame up as shown
below.
CARE INSTRUCTIONS
Hardware may loosen over time. Periodically check that all connections are tight.
nish, avoid the use of chemicals and household cleaners.
Make sure lock is enganged when mattress is not on metal frame to be sure that the metal frame does not
raise unexpectedly.
raise unexpectedly.