Wasp Bar Code WPS100 User Manual
7-40
Wasp WPS100 Product Reference Guide
Code 39 Buffering (Scan & Store)(Continued)
*
Do Not Buffer Code 39
While there is data in the transmission buffer, selecting Do Not Buffer Code 39 is not
allowed. The buffer holds 200 bytes of information.
allowed. The buffer holds 200 bytes of information.
To disable Code 39 buffering when there is data in the transmission buffer, first force
the buffer transmission (see
the buffer transmission (see
on page 7-41) or clear the buffer.
Buffer Data
To buffer data, Code 39 buffering must be enabled and a Code 39 symbol must be read
with a space immediately following the start pattern.
with a space immediately following the start pattern.
•
Unless the data overflows the transmission buffer, the scanner issues a lo/hi beep
to indicate successful decode and buffering. (For overflow conditions, see
to indicate successful decode and buffering. (For overflow conditions, see
.)
•
The scanner adds the decoded data excluding the leading space to the
transmission buffer.
transmission buffer.
•
No transmission occurs.
Clear Transmission Buffer
To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only
a start character, a dash (minus), and a stop character.
a start character, a dash (minus), and a stop character.
•
The scanner issues a short hi/lo/hi beep.
•
The scanner erases the transmission buffer.
•
No transmission occurs.
Clear Buffer