Wasp Bar Code WPS100 User Manual

Page of 466
7-54
Wasp WPS100 Product Reference Guide
Set Lengths for Interleaved 2 of 5 
The length of a code refers to the number of characters (i.e., human readable characters), 
including check digit(s) the code contains. Lengths for I 2 of 5 may be set for any length, 
one or two discrete lengths, or lengths within a specific range. 
Note: When setting lengths for different bar code types by scanning single 
digit numbers, single digit numbers must always be preceded by a 
leading zero.
One Discrete Length - This option allows you to decode only those I 2 of 5 symbols 
containing a selected length. Lengths are selected from the numeric bar codes beginning 
on page 
. For example, to decode only I 2 of 5 symbols with 14 
characters, scan I 2 of 5 - One Discrete Length, then scan followed by 4. If you make 
an error or wish to change your selection, scan Cancel on page 
.
I 2 of 5 - One Discrete Length
Two Discrete Lengths - This option allows you to decode only those I 2 of 5 symbols 
containing either of two selected lengths. Lengths are selected from the numeric bar 
codes beginning on page 
. For example, to decode only those I 2 of 5 
symbols containing either 2 or 14 characters, select I 2 of 5 - Two Discrete Lengths
then scan 02, 1, and then 4. If you make an error or wish to change your selection, 
scan Cancel on page 
I 2 of 5 - Two Discrete Lengths