Winegard RD-9946 User Manual
4
Installation Requirements
To install the Winegard Pinnacle
®
RV Satellite System, Model RD-9946, you
will need the following:
A.
An area on the RV/coach large enough to allow free movement of the
antenna/mount. See Figures 1, 2 and 3 for mount/antenna clearance.
If you do not have an area large enough, you can build up the mount
so that it will clear ALL obstructions.
antenna/mount. See Figures 1, 2 and 3 for mount/antenna clearance.
If you do not have an area large enough, you can build up the mount
so that it will clear ALL obstructions.
B.
A roof plan of your RV/coach showing the rib locations. This is required
so that you may anchor the mount securely. Figure 4 shows bolt hole
pattern and size.
so that you may anchor the mount securely. Figure 4 shows bolt hole
pattern and size.
C.
You must level your RV/coach before you proceed to install the
mount. This is required to properly level the mount on the roof.
mount. This is required to properly level the mount on the roof.
Figure 2
Rev 9/98
Figure 1