Wind Crest VEN060I Leaflet

Install Quick Specs are for planning purposes only. Please refer to the detailed installation
instructions, prior to making any cutouts.

Internally Mounted Ventilators – Install Quick Specs

VEN060I

Installation Type & Discharge Direction
Mounted in hood. Can be mounted for vertical
or horizontal discharge, depending on the
hood specified (see individual hood
specifications)

CFM Rating

640 CFM – Single Blower
1280 CFM – Dual Blower applications

Minimum Duct Size
8” round @ 640 CFM
10” round @ 1280 CFM

Maximum Equivalent Straight Duct Length
50 feet

Equivalent Straight Lengths
• 1 foot of 8” or 10” duct = 1 foot

• 1 foot of 3 ¼” x 14” rectangular = 1 foot

• 8” round 90 degree Elbow = 5 feet

• 10” round 90 degree Elbow = 3 feet

• Wall or Roof Cap = 2 feet

Standard

Features

• Adaptable to all Wind Crest hoods

• Brushed alumized steel construction

• Thermally protected, permanently

lubricated motor

• Dynamically balanced 5 ½” diameter

blower wheel

• Neoprene resilient anti-vibration mounted

• Low RPM for very quiet performance

• Two VEN060I internal blowers can be

mounted in the following hoods. This
requires a dual wire harness (part #10220).

WSL and WCL hoods 48” or wider

WER 60” wide hoods

PSL 66” wide hoods

Ventilator Motor Ratings*
Hoods without Heat Lamps:
2.8 Amps @ 120 V AC, 60 Hz
Hoods with Heat Lamps:
7.2 Amps @ 120 V AC, 60 Hz
*For maximum power supply required, refer to
hood series selected.

Ventilator Carton Weight:
VEN060I = 23 lbs.

9 "

14"

LISTED 7Z66 C

When installed in Wind Crest hoods

VEN060I