Wilife V 1.5 User Manual
Getting Started
LukWerks User Guide
12
and performance of the LukWerks system.
P
LUG
I
N
Y
OUR
C
AMERA
With the receiver plugged into your electrical
outlet, you are ready to plug in your cameras.
1)
Start by installing your cameras in a
location near your PC. This makes it
easier to adjust the focus if necessary.
Once you have focused your camera,
select a new location for the camera and
use one of the convenient mounting
options to place your camera on a
desktop, window, or wall.
Installation Note: If mounting the camera on a
window, clean the area of the window where
the suction cup will be attached. Let the area
dry completely before mounting camera.
The Window Mount Suction Cup has been tested and proven to hold the weight of objects heavier than
the camera for extended periods of time. To ensure long term connection, you can spread a very small
drop of vegetable or olive oil on the under-side of the cup before applying it to the window. This
increases the suction power of the cup.
CAUTION: The Luk camera should be mounted indoors or in a weatherproof enclosure. Additionally, you should not
point the camera directly at the sun. Failing to follow either of these warnings will damage your camera.
2)
Plug the Camera Power Supply into a nearby outlet. Then, use the included Camera Cable (8 ft.
Standard Ethernet Cable) to connect the power supply to the camera.
Note: The Camera Power Supply has built in surge protection and must be plugged directly into your wall outlet.
Plugging the Camera Power Supply into a surge protected power strip may reduce the quality and performance of
the LukWerks system.
3)
Click the NEXT> button to proceed.
N
AME
Y
OUR
C
AMERAS
Simply name your cameras by clicking inside the text field
under each video panel and entering the desired name.
Suggestions for names might be: Garage, Entryway, Foyer,
Kitchen, Storage Area, Front Door, Porch, Family Area, etc.