Wiebetech SS8 User Manual

 

   

W i e b e T e c h   L L C  

 

 
The LCM is found on the bottom side of the ProSATA.  It has four buttons for 
controlling functions: 

c(up), d(down), ENT (Enter), and ESC (Escape).  

 
c and d are pressed to scroll through the functions and options. 
ENT is pressed to enter functions and to accept selections. 
ESC is used to exit to previous menu. Holding ESC will jump back to main menu. 
 
After the system boots up, the following screen will be shown on the LCM: 
 
WiebeTech 
(IP address)            

↵ 

 
There are 6 functions accessible by the LCM: Alarm Mute, Reset/Shutdown, 
Quick Install, View IP Setting, Change IP Config, and Reset to Default. 
 

Alarm Mute 
                                 

Select Alarm Mute to mute the alarm. 

Select Reset to restart the controller without powering 
down. 
Select Shutdown to prepare controller for shutdown prior 
to powering off.  
 
Before powering off system, it is recommended to do 
Shutdown from the controller to clear the data from 
cache.

 

Select Quick Install to setup a RAID array from the 
available drives. Please see Appendix for RAID level 
definitions and minimum requirements for each RAID 
level. 

View IP Setting 
                                 
 

Select  View IP Setting to display current IP address, IP 
subnet mask, and IP Gateway. 

Change IP Config 
                                 
 

Select Change IP Config to modify IP address, IP subnet 
mask, and IP Gateway. 

Select  Reset to Default to reset to original manufacture 
settings. The login and password will return to default: 
admin:1234, and the IP address to default: 192.168.0.1