White Rodgers F61-2499 Wall Cover Plate for 1C20/1C26-XXX Installation Instruction

PART NO. 37-6423A

0223

PRECAUTIONS

DESCRIPTION

This adaptor plate assembly is designed for mounting a
1C20/1C21/1C26 series thermostat to the wall or to a
junction box. The wall cover plate covers the junction box,
wall damage, or old thermostat markings. The adaptor
plate is designed to allow vertical thermostat mounting on
vertical junction box.

All kits may not have adaptor plate or all screws shown.

FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
PERSONAL INJURY AND/OR PROPERTY DAMAGE.

CONTENTS

Description ........................................................  1
Precautions .......................................................  1
Installation .........................................................  2

INSTALLATION INSTRUCTIONS

Operator: Save these instructions for future use!

F61 Series

Adaptor Plate Assembly

To prevent electrical shock and/or equip-
ment damage, disconnect electrical power
at main fuse or circuit breaker until installa-
tion is complete.

This instruction sheet is not intended as a wiring guide.
Refer to the thermostat installation instructions to ensure
proper wiring.

NOTE

CAUTION

White-Rodgers is a division

of Emerson Electric Co.

www.white-rodgers.com

Printed In U.S.A.

6-32 X 3/4” flat-head

machine screw (4)

F61-2499

Wall Plate

Adaptor Plate