White Rodgers 2SD1 User Manual

0508082120/101203/C

Page 4

Owner’s manual

This manual provides instructions for the mounting/installation, 
control and maintenance of the air cleaner. The safety 
instructions should be read first.

The air cleaner is provided with an Air Quality Analyzer. It 
measures the local pollution continuously and adjusts the fan 
speed accordingly. The analyzer is sensitive to pollution in 
gaseous form that occurs in, for example, tobacco smoke.

The polluted air is cleaned in three successive stages.

2.1.1 Prefilter [A]
The prefilter traps the coarser dust particles and other 
pollutants. 

2.1.2 Electronic filter [B]
The electronic filter has a very high efficiency and traps dirt 
particles larger than 0.01 micron;

or (in case of a media filter):

2.1.3 Media filter [B]
The media filter is folded in such a way that it has a large 
effective surface area. This gives a low air resistance and a high 
dirt collection capacity.

2.1.4 Activated carbon filter [C]
The activated carbon filter adsorbs unpleasant smells.

2.2.1 Odor Free
If the air cleaner is provided with an Odor Free filter obnoxious 
odors can be suppressed. The standard activated carbon filter 
is replaced by the Odor Free filter.

The air cleaner can be installed in several ways using different 
installation kits.

• For wall mounting use installation kit #  F801 0193. This kit 

is only suitable for single air cleaners.

• For ceiling mounting of the air cleaners, use installation kit 

# F801 0195. For a single air cleaner one set is required, for 
the double air cleaner two sets are required.

• For recessed ceiling mounting of the single air cleaner use 

installation kit # F801 0196. 
For the double air cleaner, use installation kit # F801 0197.

There are no components for mounting to the ceiling or wall in 
these kits. 

Ensure that the load capacity of the mounting devices is 
sufficient to safely support the air cleaner. The weights of the 
air cleaner are maximum 39.9 lbs. and 65.5 lbs. respectively.

For the single air cleaner on a pedestal, use pedestal installation 
kit # F848 0384.

Use the materials prescribed during the installation. Connect the 
air cleaner to power only after complete installation.

Maintain your air cleaner carefully and regularly. If poorly 
maintained, it can be a fire hazard. Always disconnect the air 
cleaner from power during maintenance and cleaning.

Adhere to the maintenance instructions and advice on filter 
replacement.
Replace or clean the filters on time.

Only use manufacturer's original replacement parts.

Inspect the product for damages regularly. The safety features 
should be checked regularly for proper functioning and, if 
required, be repaired immediately.
The cord should be checked regularly and, if damaged, replaced 
by a qualified service person.

Filter replacement/cleaning frequency depends on local 
conditions, the fan speed selected and the operating time of the 
air cleaner. The Service Indicator can be used to help determine 
the filter replacement/cleaning frequency. See Program Settings 
step 1.

A crackling or snapping sound will be heard occasionally during 
use of the air cleaner. This is normal and is caused by high 
voltage arcing in the filter. Cleaning the electronic filter is 
necessary when the crackling or snapping is heard frequently.

Filter replacement/cleaning may be done as described in the 
technical repair section.

Wipe the outside of the air cleaner with a moist cloth. Do not 
use cleaning products that contain ammonia or abrasives. The 
air cleaner is not resistant to organic solvents, such as benzene, 
etc. It is possible that the Air Quality Analyzer temporarily 
reacts abnormally with exposure to cleaning agents.

Dimensions

24.8x24.4x11.4 in.

24.8x41.3x11.4 in.

Max. built-in height

8.3 in.

8.3 in.

Weight

max. 39.9 lbs.

max. 65.5 lbs.

Power consumption:
- electronic
- media

130 W
118 W

225 W
222 W

Voltage

115V, 60Hz

115V, 60Hz