Whistler WGPX-635 User Manual
15
Whistler WGPX-635/650
Assembling the Windshield Bracket
The included windshield bracket set can be securely placed on the front windshield. This device will effectively
secure the GPS unit to the vehicle’s windshield. Note: Not recommended for motorcycle use with supplied bracket.
Follow the procedures below to secure the bracket:
1. Follow the indicated directions and insert component B into slot on cradle A, slide in the direction indicated by
secure the GPS unit to the vehicle’s windshield. Note: Not recommended for motorcycle use with supplied bracket.
Follow the procedures below to secure the bracket:
1. Follow the indicated directions and insert component B into slot on cradle A, slide in the direction indicated by
the arrows to secure.
2. Once the cradle is secure, bend the bracket arm as shown below. Remove the protective plastic that may be
covering the suction cup. The bracket may not adhere to the windshield with this plastic on the suction cup.
3. Press the locking tab toward the windshield to secure the suction cup to the windshield as shown below.
4. To remove bracket from windshield, simply press in on the two release “buttons” on the locking tab and move
the tab away from the suction cup.
Installation
1 Release Button Shown
Windshield mount pictured may be
different than what was packaged
with the unit. The bracket is bendable.
different than what was packaged
with the unit. The bracket is bendable.