Wharfedale SPX613 User Manual
,
WHARFEDALE PRO SPX613 / SPX815 OWNER S MANUAL
Page 5
+3
+6
+9
+12
-3
-6
-9
-12
+3
+6
+9
+12
-3
-6
-9
-12
13
15
14
SPX613 / SPX815 FEATURES
5
12
11
10
9
8
7
2
1
4
3
6
SPX613 / SPX815 FEATURES
Powered Mixers SPX613 & SPX815
11. EFX (Effects) Send
Controls:
Each EFX control is post
channel level and post EQ. Any
changes made to the channel level
and/or the equalizer section of a
channel will affect the EFX SEND
signals. There is 15 dB of signal gain
available for each EFX SEND knob.
12. MONITOR Send Controls:
The MON send control determines the
amount of signal that is fed to the
monitor buss. This control is Pre-fader
and derives its signal independent
from the channel level control. Any
changes made on the channel fader
do not affect the signal that is sent to
, ,
,,
the MON buss. This send is
commonly used for a stage monitor
mix in sound reinforcement
applications.
13. Power ON LED:
This LED
lights when the power is on for the
mixer.
14. EFX TO MAIN:
This knob is
the
level control for the internal effects
unit and the EFX Return Jack (when
an external device is connected to this
jack). This knob controls the amount of
the effects signal that is mixed with the
, ,
,,
unprocessed, clean signal of the
main mix.
15. EFX TO MONITOR:
This knob
is the
level control for the internal
effects unit and the EFX Return Jack
(when an external device is connected
to this jack) that is routed to the
MONITOR buss of the mixer. This knob
controls the amount of the effects
signal that is mixed with the
, ,
,,
unprocessed, clean signal of the
monitor mix.
LOW EQ control is centered at 80Hz.
Stereo channels have two band equalization with the HI EQ
control is centered at 10kHz and the LOW EQ control is centered at 100Hz.