Westinghouse LCM-17v2 User Manual

•  Make sure DC cord is plugged into the back of the LCD Monitor. 

•  Make sure AC power cord is securely connected to the AC socket 

•  Plug another electrical device (like a radio) to the power outlet to verify that the outlet is 

supplying the proper voltage 

•  Make sure power button is ON. 

•  Check whether the LCD monitor and computer power cords are plugged in and whether 

there is a supply of power. 

•  Adjust brightness and contrast 

•  Check signal connection properly seated both on PC and Monitor. 

 

•  Check the computer image output resolution and frequency and compare the value with 

the preset values of graphics card. 

 

•  Adjust Phase. 
 

•  Adjust brightness and contrast by OSD. 

•  Irregular Image 

•  Check the signal connection between the computer and LCD monitor. 

•  Perform Auto Adjust. 
 

•  Reset the LCD monitor. (Perform the “Recall” function by OSD) 

•  Take off extra accessories (such as signal extension cord). 
 

•  Perform Auto Adjust   
•  OSD Image Menu to adjust H. Position and V. Position. 

•  Check image size setting. 
 

•  Use OSD Color Menu to adjust color setting. 
 

•  Check your audio connection 

 

•  Use the 75mm VESA hole pattern to secure mounting plate to the LCD Monitor. 

•  Use professional installation to reduce risk of injury and damage 

      12