Westinghouse W31501 User Manual
Getting to Know Your LCD Display
11
EN
GLISH
2.10 Turning On the LCD Display
1
Press the Power key on the LCD
display control panel or remote
control to turn the LCD display on.
The power LED on the front panel
glows green.
display control panel or remote
control to turn the LCD display on.
The power LED on the front panel
glows green.
2
Press either Power key again to
turn the LCD display off. The
power LED on the front panel
glows orange.
turn the LCD display off. The
power LED on the front panel
glows orange.
2.11 Power Management System
Your LCD display complies with the VESA DPMS power management pro-
posal. The VESA DPMS proposal provides four phases of power saving
modes by detecting the horizontal or vertical sync signal. When the LCD
display is in power saving mode or detects an incorrect timing, the monitor
screen becomes blank and the power LED indicator blinks green.
posal. The VESA DPMS proposal provides four phases of power saving
modes by detecting the horizontal or vertical sync signal. When the LCD
display is in power saving mode or detects an incorrect timing, the monitor
screen becomes blank and the power LED indicator blinks green.
2.12 Status LEDs
The following table describes the LCD display status LEDs.
DC 12V
Mode
LED
Meaning
PC
Blinking Green
Power saving mode
Blinking Green
Over-range detected
(the input signal is out
of the range of the mon-
itor).
(the input signal is out
of the range of the mon-
itor).
Steady Green
Normal Operation
TV
Steady Green
Normal Operation
AV/SV/YPbPr
Green LED
Signal is present
Orange LED
No Signal is present
Power Off
LED off
nextgen-nt1503.book Page 11 Thursday, December 25, 2003 4:42 PM