Alpine IVA-D106R User Manual
79
-EN
When Connecting External Equipment
EQ/DIV
NORM
System Switch
When connecting an equalizer or divider using Ai-NET
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switch in the
NORM position.
Change both switches to the left to set to the NORM
position.
Change both switches to the right to set to the EQ/DIV
position.
(If the front panel is viewed from the front.)
• Do not make the two switches to different settings.
• Be sure to turn the power off to the unit before changing the
feature, place the two switches in the EQ/DIV position.
When no device is connected, leave the switch in the
NORM position.
Change both switches to the left to set to the NORM
position.
Change both switches to the right to set to the EQ/DIV
position.
(If the front panel is viewed from the front.)
• Do not make the two switches to different settings.
• Be sure to turn the power off to the unit before changing the
switch position.
Video/Audio Output Connectors (AUX OUTPUT)
Use when connecting an optional monitor etc.
iPod (V) / CAMERA Connector
Use when connecting a back-up camera.
Audio Input Connectors (AUX / CAMERA IN)
RCA Extension Cable (Sold separately)
Remote Control Output Lead (White/Brown)
Connect this lead to the remote control input lead. This lead
outputs the controlling signals from the remote control.
outputs the controlling signals from the remote control.
Remote Control Input Lead (White/Brown)
Reverse Lead (Orange/White)
Use only when a back-up camera is connected. Connect to
the plus side of the car’s reverse lamp. This lamp illuminates
when the transmission is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
the plus side of the car’s reverse lamp. This lamp illuminates
when the transmission is shifted into reverse (R).
With this lead properly wired, the video picture
automatically switches to the back-up camera whenever the
car is put into reverse (R).
To Audio Input terminal
To Video Input terminal
To Video Output terminal
To Video Output terminal
To Audio Output terminal
Rear monitor
(Sold Separately)
(Sold Separately)
Back-up camera
(Sold Separately)
(Sold Separately)
TV Tuner or VCR
(Sold Separately)
(Sold Separately)
(White/Brown)
REMOTE OUT
REMOTE IN
(White/Brown)
(White/Brown)
REMOTE IN
REMOTE OUT
(White/Brown)
(Orange/White)
REVERSE
Use only when back-up camera is connected.