Sharp SD-HX600 User Manual

SD_HX600_SEC_SECL_E1.fm

04/3/15

TINSKA016AWZZ

F

S

V

I

N

P

E

E

SD-HX600

!

To connect:
Insert the cable until it clicks, with the arrow facing up (main unit) and facing down
(AV selector).

To disconnect:
Pull the cable straight out pressing the plug.

"

If your TV is not equipped with a component video input, it is not necessary to con-
nect the component video cable between the main unit and the AV selector.

"

If your TV is equipped with a component video input, then you should connect the
component video cable between the main unit and the AV selector, and be sure to
connect an additional component cable between the AV selector and the TV.

 

"

You can enjoy higher quality images using the component video or S-video output.
Use a commercially available cable. (see page 17).

"

Alternatively, connect the video output jack on the main unit to the TV's video input
jack to view images.

"

Change the TV input in accordance with the connected jack.

"

Do not connect other equipment between the TV and AV selector. If a VCR is con-
nected, pictures may be distorted.

"

Using the audio cable, you can listen to the TV sound with this unit (see page 61).

 

 
Connecting other equipment (See pages 61 - 65.)

Connect the supplied system connection cable (for signal/sound/power).

To connect:
Match the colors when connecting the cables. 
Insert the cable until it clicks, with the arrow 
side up.

To disconnect:
Pull the cable straight out pressing the plug.

1

Connect the supplied system connection cable (for signal/sound).

2

Connect the supplied component video cable and S-video cable.

3

Connect the supplied coaxial digital cable and audio cable.

Arrow

Push

Unplug

1

2

Arrow

Main unit:

Arrow

AV selector:

Main unit:

AV selector:

Push

Unplug

1

2

Push

Unplug

1

2

Use the supplied video cable.

etc.

Projector

2

SHARP TI

NSKA0

1

6

A

W
ZZ
 (

C

,U

)