Sharp SD-HX600 User Manual

SD_HX600_SEC_SECL_E1.fm

04/3/15

TINSKA016AWZZ

SD-HX600

If your TV is equipped with an S-video input jack or component video input jacks, pur-
chase an appropriate cable to enjoy higher quality images.
When you use a TV supporting progressive scan, open the initial setting screen and
set "PROGRESSIVE OUT" to "ON" in "TV MODE" (see page 46).

"

For the connection, you can also connect the S-video output jack or component
video output jacks on the main unit to TV's S-video input jack or component video
input jacks.

"

Change the TV input in accordance with the connected jack.

"

Do not connect other equipment between the TV and AV selector. If a VCR is con-
nected, pictures may be distorted.

"

Using the audio cable, you can listen to the TV sound with this unit (see page 61).

"

If your TV has different indications for the component video inputs (Y, CB and CR
or Y, B-Y and P-Y), connect jacks with its matching color.

"

Do not connect to a component video input jack designed for the high-vision sys-
tem, which is not DVD-compatible (the images may be distorted or not appear).

"

To view images, connect a TV to the AV selector with a video cable, component
video cable, or S-video cable.

"

When using a component video cable, connect the component video input and
output jacks. When using an S-video cable or video cable, connect the S-video/
video input and output jacks.

!

Bundle up cables of the main unit and amplifier unit using each cord holder.

Component video cable (commercially available)

To component 
video input jacks

To S-video 
input jack

S-video cable

(commercially available)

AV selector

 

1

Move one side towards outside.

2

Lift up to remove.

 
Note:
If the image or sound is distorted, remove the AC power 
cord and antenna wires from the holder.

Main unit

Amplifier unit

Cord holder

1

2