Sharp SD-HX600 User Manual
E-50
SD_HX600_SEC_SECL_E5.fm
04/3/15
ENGLISH
TINSKA016AWZZ
F
S
V
I
N
P
E
E
SD-HX600
Ad
v
a
nced
F
e
atures
- Cha
n
ging the
de
fa
ult s
e
ttings
of the
a
m
pli
fie
r -
!
Speaker level setting
If sounds from the speakers are uneven, you can equalize them by adjusting the
speaker levels.
speaker levels.
Notes:
"
The speaker level setting is only available for the front speakers and subwoofer if
the input is set to tuner, or the surround is "STEREO" or "VIRTUAL".
the input is set to tuner, or the surround is "STEREO" or "VIRTUAL".
"
If subwoofer sound is distorted, lower the subwoofer level.
!
Test tone
You can check each speaker sound by a test tone. Readjust the volume set in
"Speaker level setting".
"Speaker level setting".
Notes:
"
The test tone is produced only from the front speakers and subwoofer if the input
source is set to tuner or the surround is "STEREO" or "VIRTUAL".
source is set to tuner or the surround is "STEREO" or "VIRTUAL".
"
If NO (OFF) is selected for a speaker in the speaker size setting, no test tone will
be heard from it.
be heard from it.
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
UP button.
2
Within 10 seconds, press the or button to
select "SP LEVEL", and press the ENTER but-
ton.
select "SP LEVEL", and press the ENTER but-
ton.
3
Within 10 seconds, press the or button to
select the desired speaker.
select the desired speaker.
The indicator of the selected speaker flashes.
4
Within 10 seconds, press the or button to
adjust the level.
adjust the level.
"
You can adjust the level at 1 dB intervals.
"
To adjust the levels of other speakers, repeat the op-
eration from step 3.
eration from step 3.
5
Press the RETURN
button twice.
The setting is complete.
Speaker type
Level range
Default setting
FL
Front speaker (Left)
- 10 dB to + 10 dB
0 dB
CT
Center speaker
- 10 dB to + 10 dB
0 dB
FR
Front speaker (Right)
- 10 dB to + 10 dB
0 dB
SR
Surround speaker (Right)
- 10 dB to + 10 dB
0 dB
SL
Surround speaker (Left)
- 10 dB to + 10 dB
0 dB
SW Subwoofer
- 10 dB to + 10 dB
0 dB
1
Set the MODE 1/MODE 2 switch to MODE 2 and press the AMP SET
UP button.
UP button.
2
Within 10 seconds, press the or button to
select "TONE", and press the ENTER button.
select "TONE", and press the ENTER button.
The test tone will be heard from each speaker, in order, at about 2-second inter-
vals.
vals.
To adjust speaker levels
While the test tone is heard:
Adjust the level with the or button.
Press the or to select a speaker.
3
Press the RETURN
button twice.
The setting is complete.
FL
CT
FR
SW
SL
SR