Sharp SD-HX600 User Manual

SD_HX600_SEC_SECL_E6.fm

04/3/15

TINSKA016AWZZ

F

S

V

I

N

P

E

E

SD-HX600

!

You can record images and sounds from the equipment connected to the VIDEO 2 or
VIDEO 3 input jack to a DVD recorder or VCR connected to the VIDEO 1 output jack.
The equipment should be connected to the AV selector with a video cable/S-video
cable and audio cable.
 

"

If an S-video cable or video cable is connected to the video input, signals are sent
to the S-video output and video output.

"

You cannot record images from the equipment connected with a component video
cable.

"

You cannot record sounds from the equipment connected with an optical digital
cable or coaxial digital cable.

"

Some discs are copy protected and recording is not possible.

"

You cannot record material with copy protection (digital broadcasts, etc.).

"

While recording, do not switch to another function.

"

You can also use the FUNCTION button on the main unit to set the input to VIDEO
2 or VIDEO 3.

"

When recording between equipment connected to the AV selector, you do not
need to turn on the main unit. Select VIDEO 2 or VIDEO 3 with the function but-
tons on the AV selector. In this case, the speakers do not produce sound.

"

To record the TV sound, press the TV button.

"

Plug in each cable fully to prevent noise interference.

1

Turn on the AV selector and main unit.

2

Press the VIDEO 1, 2, 3 button on the remote control to set the input to VIDEO 2 
or VIDEO 3.

3

Start recording on the equipment connected to the VIDEO 1 output jack and then 
start playback on the source equipment.

AV selector

VIDEO 1

VIDEO 2

VIDEO 3