Marantz SR5300 User Manual

12

CVBS

L R

L R

L R

L R

L

R

L

R

L R

L

R

L R

L R

L R

L

R

L

R

There are two types of video jacks on the rear panel.

VIDEO jack
The video signal for the VIDEO jacks is the conventional composite
video signal.

S-VIDEO jack
The video signal is separated into luminance(Y) and color(C) signals
for the S-VIDEO jack. The S-VIDEO signals enables high-quality color
reproduction. If your video component has an S-VIDEO output, we
recommend to use it. Connect the S-VIDEO output jack on your video
component to the S-VIDEO input jack on this unit.

• Be sure to connect the left and right audio channels properly.

Red connectors are for the R(right) channel, and white
connectors are the for L(left) channel.

• Be sure to connect input and output of video signal properly.

• If you connect the S-VIDEO signal to the S-VIDEO jack on this

unit, it is not necessary to connect the conventional video signal
to the VIDEO(composite) jack. If you use both video inputs,
this unit gives priority to the S-VIDEO signal.

• Each type of video jack works independently. Signals input to

the VIDEO(composite) and S-VIDEO jacks are output to the
corresponding VIDEO(composite) and S-VIDEO jacks,
respectively.

• This unit has the “TV-AUTO ON/OFF” function to turn ON or

OFF automatically the power by the incoming video signal
from VIDEO jacks.

• You may need to setup the digital audio output format of your

DVD player, or other digital source component. Refer to the
instructions of the each component connected to the digital
input jacks.

• There is no Dolby Digital RF input jack. Please use an external

RF demodulator with Dolby Digital decoder to connect a video
disc player with the Dolby Digital RF output jack to the digital
input jack on this unit.