GE ISOVOLT Titan E Brochure
GE Inspection Technologies
Xray
SEIFERT ISOVOLT
Three-Phase Primary Interlock Switch for ISOVOLT HS
Application
• Produced under ISO 9001 certified quality management system
A primary interlock switch is used in
radiation protection cabinets and rooms
in conjunction with doors and flaps that
can be opened under regular operative
conditions, if the power supply of the
X-ray radiating unit must be interrupted
in the primary current circuit and if this
disconnection through an interlock circuit
must be physically linked to said doors
and flaps.
radiation protection cabinets and rooms
in conjunction with doors and flaps that
can be opened under regular operative
conditions, if the power supply of the
X-ray radiating unit must be interrupted
in the primary current circuit and if this
disconnection through an interlock circuit
must be physically linked to said doors
and flaps.
The primary interlock switch consists
of two components which are designed
in such a way that only one of them
needs wiring. This component is usually
mounted to the non movable part of the
cabinet. The second component of the
primary interlock switch is attached to
the door or flap and does not need any
electrical connections.
of two components which are designed
in such a way that only one of them
needs wiring. This component is usually
mounted to the non movable part of the
cabinet. The second component of the
primary interlock switch is attached to
the door or flap and does not need any
electrical connections.
The switch is wired in such a way that
upon opening it directly interrupts the
primary current circuit of the X-ray
equipment. An additional internal switch
is available for status messages to the
control.
upon opening it directly interrupts the
primary current circuit of the X-ray
equipment. An additional internal switch
is available for status messages to the
control.