Wayne-Dalton TORQUEMASTER 46 User Manual

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your 

local yellow pages/business listings or go to the 

Find a Dealer section online at www.wayne-dalton.com

SAfETy GLASSES

fLAT TIP SCREWDRIVER

1/4”, 3/8”, 7/16”, 1/2” & 

9/16” WRENChES

1/2”, 9/16”, 5/8”  

& SOCkET

PhILLIPS hEAD 

SCREWDRIVER

PLIERS/WIRE CuTTERS

RATChET WRENCh

POWER DRILL

(2) SAWhORSES

GLOVES

7/16”, 1/2” SOCkET 

DRIVER

hAMMER

VICE GRIPS

STEP LADDER

TAPE MEASuRE

LEVEL

(2) VICE CLAMPS

PENCIL

1/8”, 3/16”, 9/32”, 

5/16”, 1/2” DRILL BITS

3” EXTENSION

Counterbalance spring tension must always be released before any attempt is made to start removing an existing door.

A POWERfuL SPRING RELEASING ITS ENERGy SuDDENLy CAN CAuSE SEVERE OR fATAL INjuRy. TO AVOID 

INjuRy hAVE A TRAINED DOOR SySTEMS TEChNICIAN, uSING PROPER TOOLS AND INSTRuCTIONS, RELEASE 

ThE SPRING TENSION.

for detailed information see supplemental instructions “removing an existing door/preparing the opening”. These instructions are 
available at no charge from Wayne-Dalton Corp., P.O. Box 67, Mt. hope, Oh 44660, or at www.wayne-dalton.com.

hACkSAW

TORX BIT