Wayne-Dalton 8800 User Manual

Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your 

local yellow pages/business listings or go to the 

Find a Dealer section online at www.wayne-dalton.com

SAFETY GLASSES

FLAT TIP SCREWDRIVER

1/4”, 3/8”, 7/16”, 1/2” & 

9/16” WRENChES

7/16”, 1/2” & 

9/16” SOCKET

PhILLIPS hEAD 

SCREWDRIVER

RATChET WRENCh

POWER DRILL

SAWhORSE

GLOVES

3/8”, 7/16” SOCKET 

DRIVER

hAMMER

VICE GRIPS

STEP LADDER

TAPE MEASURE

LEVEL

VICE CLAMPS

PENCIL

9/32”, 1/2”, 3/16” & 1/8” 

DRILL BITS

Counterbalance spring tension must always be released before any attempt is made to start removing an existing door.

A POWERFUL SPRING RELEASING ITS ENERGY SUDDENLY CAN CAUSE SEVERE OR FATAL INjURY. TO AVOID

INjURY hAVE A TRAINED DOOR SYSTEMS TEChNICIAN, USING PROPER TOOLS AND INSTRUCTIONS, RELEASE ThE 

SPRING TENSION.

For detailed information see supplemental instructions “removing an existing door/preparing the opening”. These instructions are 
available at no charge from Wayne-Dalton Corp., P.O. Box 67, Mt. hope, Oh 44660, or at www.wayne-dalton.com.

APPROVED WINDING BARS

1/4” TORx BIT

NEEDLE NOSE 

PLIERS