IBM Intel Xeon E5506 46M1079 User Manual
Product codes
46M1079
Boxed Processor Specifications
150
Intel
®
Xeon
®
Processor 5500 Series Datasheet, Volume 1
8.3
Fan Power Supply (“Combo” and “Active”
Solution)
The 4-pin PWM controlled thermal solution is being offered to help provide better
control over pedestal chassis acoustics. This is achieved though more accurate
measurement of processor die temperature through the processor’s Digital Thermal
Sensors. Fan RPM is modulated through the use of an ASIC located on the baseboard
that sends out a PWM control signal to the 4th pin of the connector labeled as Control.
This thermal solution requires a constant +12 V supplied to pin 2 of the active thermal
solution and does not support variable voltage control or 3-pin PWM control. See
control over pedestal chassis acoustics. This is achieved though more accurate
measurement of processor die temperature through the processor’s Digital Thermal
Sensors. Fan RPM is modulated through the use of an ASIC located on the baseboard
that sends out a PWM control signal to the 4th pin of the connector labeled as Control.
This thermal solution requires a constant +12 V supplied to pin 2 of the active thermal
solution and does not support variable voltage control or 3-pin PWM control. See
through
for details on the 4-pin active heat sink solution
connectors.
Figure 8-13. Thermal Solution Installation