Ronco Smart Juicer Instruction Manual

1.  Once all parts are secure and in 

place, connect the power cord to 
an approved power source/outlet.

2.  Place the pulp container under the 

pulp ejector and a juice receptacle 
or glass under the spout for juice 
before turning the Smart Juicer on.  
Juice and pulp will begin ejecting 
immediately.

3.  The Smart Juicer has 3 settings: 

ON - this starts the motor for juicing.

OFF - This stops the operation.

REV - This moves the auger in the 

opposite direction for unclogging or  
unblocking.

4.  Before placing food in the juicer, please make sure all foods 

are thoroughly washed and cleaned. Cut all foods into the 
appropriate size to easily fit into the food chute. Please remove 
any hard seeds before juicing.

5.  For the most part, when placing food into the Smart Juicer, the 

auger will pull in the food and start juicing immediately. However, 
you may need to use the included pusher with some foods.  
NEVER INSERT YOUR FINGERS INTO THE FOOD CHUTE TO 
MOVE THE FOOD ALONG. ALWAYS USE THE FOOD PUSHER.

6.  The bowl has a non-drip cap that you can use to keep juice from 

dripping out when switching juice glasses or receptacles.

7.  The Smart Juicer has a unique simple flushing process when 

switching between different flavors of juices and fruits. When 
you are ready, simply pour water through the food chute. This 
will rinse out most of the residue and you are ready to continue 
juicing with a different food. MAKE SURE YOU HAVE A LARGE 
ENOUGH RECEPTACLE READY TO CATCH THE WATER WHEN 
FLUSHING.
 
NOTE: This is not an alternative to a complete cleaning of 
each disassembled part.

9