Yamaha DVD Player DVD-S1700 User Manual

■ Digital connections

If you want to use the Dolby Digital, DTS or MPEG 
function on your AV receiver, connect DIGITAL 
(OPTICAL) <A> or DIGITAL (COAXIAL) <B> or 
HDMI <C> jack of this unit to the corresponding input 
jacks of your AV receiver using a commercially available 
digital optical, digital coaxial or HDMI cable.
See “HDMI jack <A>” on page 12 about HDMI 
connection.

• If you make a connection with <A> or <B>, set [Digital Out] 

to [All] (see “Setting the digital output” on page 28).

• If the audio format of the digital output does not match the 

capabilities of your receiver, the receiver produces a distorted 
sound or no sound at all. Make sure to select the appropriate 
audio format from the menu screen on the disc. 
Pressing AUDIO on the remote control once or more may 
change not only the audio languages but also the audio format.

• SA-CD audio signals are not output from DIGITAL 

(COAXIAL/OPTICAL) jacks.

• If you want to enjoy Dolby Digital, DTS, and MPEG formats, 

you must connect this unit to an AV receiver that supports 
these formats.

This unit has SCART, composite video, S-video, 
component video and HDMI output jacks. If your AV 
receiver has video output jacks, connect your receiver and 
then your TV so that you can use one TV for several 
different video sources (LD, VCR etc.) by simply 
switching the input source selector on your receiver.
Use the one that corresponds to the input jacks on the 
component to be connected.