Vocopro CDG-X3P User Manual

1.  AC POWER CORD - Plugs into any AC wall outlet.

2.  FUSE - IMPORTANT! If the fuse blows out it’s a good indication that there may be a short in the system. 

DO NOT REPLACE THE FUSE!  
     Doing so could possibly cause additional damage to the unit. Take your CDG-X3P to an authorized repair facillity.

3.  117/200W AC OUTLET - This outlet can be used to connect another component providing it does not exceed 
     200 watts maximum power consumption.

4. RECORD OUT TERMINAL – Connect to the audio input jacks of another recording device. 
5.  VIDEO OUTPUT JACKS - Connect to the video input jacks of a TV monitor.
6.  PRE-OUT TERMINAL - Connect to the audio input jacks of an amplifier.
7.  LD INPUT JACKS - Connect to the audio and video output jacks of a laser disc player.
8.  VD - Connect to the audio and video output jacks of a HI-FI V.C.R.
9.  AUX INPUT JACKS - Connect to the audio output jacks of a player.

10. LEFT SPEAKER OUTPUT JACK: Connect to the left speaker using a speaker cable.

     Note: The jack is split into positive (+) and negative (-) output jacks but is used as one jack for the right channel only.

11. RIGHT SPEAKER OUTPUT JACK: Connect to the right speaker using a speaker cable.
      Note: The jack is split into positive (+) and negative (-) output jacks but is used as one jack for the left channel only.

 1

 2

 3

 5

 7

 8

 11

 4

 6

 10

 9