Viper LCD 2_Way Owner's Manual
11
© 2012 Directed. All rights reserved.
Page notification
The remote control can notify the user of a page by emitting beeps
if the vehicle’s status changes, for example, if a door is unlocked, or
any vehicle violation.
On the 2-way remote, press
if the vehicle’s status changes, for example, if a door is unlocked, or
any vehicle violation.
On the 2-way remote, press
to select page On/Off. One beep is
page On. Two beeps is page Off.
When programmed off the remote does not give any notification that
a page was received from the vehicle.
When programmed off the remote does not give any notification that
a page was received from the vehicle.
Page notification
Response
On
1 beep
Off
2 beeps
Note: If programmed Off, the remote receives no notification of alarm
triggers. The remote only receives command, such as arm or disarm,
information.
triggers. The remote only receives command, such as arm or disarm,
information.
Vehicle Select
If multiple cars are used with the system: Press
P
for 1 second and re-
lease (holding for too long enters programming mode) to select which
vehicle is to be controlled by the remote control. Repeat this procedure
to scroll to next vehicle selection.
vehicle is to be controlled by the remote control. Repeat this procedure
to scroll to next vehicle selection.
Note: If a Warn Away or alarm trigger occurs in a vehicle not se-
lected, remote control functions automatically switch to that specific
vehicle and remains in this vehicle select state. The Vehicle Select
procedure must be used to return to the previous vehicle selection.
lected, remote control functions automatically switch to that specific
vehicle and remains in this vehicle select state. The Vehicle Select
procedure must be used to return to the previous vehicle selection.