Sony NEX-VG30H User Manual
Table of C
on
ten
ts
Sear
ch image
ch image
Inde
x
x
US
output from the camcorder is NTSC color.
Images may not be played back normally,
depending on the connected TV.
When you have activated [24p Mode], you
cannot set [
/
Setting] to [
STD
Quality] or you cannot use [
Frame Rate].
Calibration
See page 103.
Battery Info
You can check the estimated remaining
capacity of the battery.
Touch
in upper left on the screen.
Version
You can see the version of the lens and your
camcorder. You can use this function when
the firmware update of your camcorder was
released.
Notes
You should update only when using the AC
Adaptor. Otherwise, we recommend using a
fully charged battery.
The version of the lens may not be displayed in
any mode other than shooting mode.
Date & Time Setting
Date & Time Format
You can select one from 4 types of date and
time format.
Daylight Savings/Summer Time
You can change this setting without
stopping the clock. Set to [On] to move the
time forward 1 hour.
Off
Does not set the summertime.
On
Sets the summertime.
Date & Time
See page 23.
Area Setting
You can adjust a time difference without
stopping the clock. Select your local area
when using the camcorder in other time
zones. Refer to the world time difference
information on page 99.
Home
Select this item when you are going to use
the camcorder in the area where you are
living.
Destination ( )
Select this item when you want to use
the camcorder with the area setting set to
another place.
Tips
If you visit a certain place often and want to
use the camcorder with the area setting set to
that place, it is useful if you set the place to
[Destination].