Sony Microscope & Magnifier snt-v User Manual
preliminary
Installation
14
Dialog boxes relating to [Input 1] (Alarm Input 1) to
[Input 4] (Alarm Input 4) are displayed for the
following items.
[Input 4] (Alarm Input 4) are displayed for the
following items.
Setting
Alarm Enabled
Always
Restricted
Between
Between
Start
Stop
Mon to Sun
Alarm ON at:
Positive-edge
Positive-edge
Alarm ON at:
Negative-edge
Negative-edge
Image every X
second(s)
second(s)
Number of PRE
alarm images
alarm images
Number of POST
alarm images
alarm images
Alarm duration
No Upload
Upload Via FTP
Host Name
User Name
Password
Upload Via e-mail
(one image only)
(one image only)
To Email
Subject
Text
Description
Alarm input is enabled when this box is
checked.
checked.
Alarm input is always enabled when
this radio button is selected.
this radio button is selected.
Alarm input is enabled for a specific
time of day when this radio button is
selected.
time of day when this radio button is
selected.
When the [Restricted Between] radio
button is selected, enter the start time
here.
button is selected, enter the start time
here.
When the [Restricted Between] radio
button is selected, enter the stop time
here.
button is selected, enter the stop time
here.
Check the boxes to specify particular
days on which the alarm input should
be enabled.
days on which the alarm input should
be enabled.
Check this box to have a rising alarm
input signal indicate the occurrence of
an alarm event.
input signal indicate the occurrence of
an alarm event.
Check this box to have a falling alarm
input signal indicate the occurrence of
an alarm event.
input signal indicate the occurrence of
an alarm event.
Select the storage interval for images
during an alarm event.
during an alarm event.
Enter the number of images (0 to 99)
to be saved prior to an alarm event.
to be saved prior to an alarm event.
Enter the number of images (0 to 99)
to be saved after an alarm event.
to be saved after an alarm event.
Enter the time (seconds) from an
alarm occurrence until the alarm mode
is cleared.
alarm occurrence until the alarm mode
is cleared.
Select this radio button to disable
transfer of saved images.
transfer of saved images.
Select this radio button to transfer
saved images by ftp.
saved images by ftp.
Enter the host name of the transfer
destination.
destination.
Enter the user’s name on the host at
the transfer destination.
the transfer destination.
Enter the password of the above user.
Select this button to send a saved
image as an e-mail attachment.
image as an e-mail attachment.
Enter the mail address of the
destination for image files. Multiple
addresses may be entered by
separating with commas. Up to 100
characters may be entered.
destination for image files. Multiple
addresses may be entered by
separating with commas. Up to 100
characters may be entered.
Enter the title text for the e-mail.
Enter the body text for the e-mail.
Network Settings
The
(Network Settings) icon is used for settings
related to the supporting network protocol. Clicking
the “Network Setting”s icon displays the following
screen.
the “Network Setting”s icon displays the following
screen.
Settings can be made with the following procedures.
•
•
(Network Wizard) icon: click to display Wizard
instructions for making the settings.
•
(Detailed View) icon: click to display a dialog
box with [TCP/IP], [DNS] and [SMTP EMail] tabs
that you can select to make corresponding settings.
that you can select to make corresponding settings.
Setting
Camera Link
Upload Path: (FTP
only)
only)
Base File Name
Date/Time Suffix
Sequence
Number
Suffix set to
Maximum
Number
Suffix set to
Maximum
Sequence
Number
Suffix up to:
Number
Suffix up to:
Description
Check this box to include in the e-mail
a link to the real-time image on the
camera where an alarm event occurs.
a link to the real-time image on the
camera where an alarm event occurs.
Enter the path of the save destination
for image files sent by ftp to a host.
for image files sent by ftp to a host.
Enter the base file name for image
files to be sent.
files to be sent.
Select this radio button to have the
date and time appended to the base
file name.
date and time appended to the base
file name.
Select this radio button to have a
sequential number appended to the
base file name.
sequential number appended to the
base file name.
When a sequential number is attached
to the base file name, to set an upper
limit to the numbering, select this radio
button and enter the upper limit.
to the base file name, to set an upper
limit to the numbering, select this radio
button and enter the upper limit.