Sony DJ Equipment SRP-X700P User Manual

16

1 Channel select button

Selects the OUTPUT channel that you want to set.
The selected button lights in yellow.

2 OUTPUT index

Displays the index that is entered on the BLOCK screen.

3 Frequency response graph

Displays the overall frequency response characteristics of the
high-cut filter and parametric equalizer.

The OUTPUT 1 and OUTPUT 2 channels have an 11-band
parametric equalizer. The OUTPUT 3 to OUTPUT 8 channels have
a 4-band parametric equalizer. Clicking the  v  or  V  button
changes the following parameters of each band. You can also enter
numerical values directly. You can change the center frequency and
the GAIN by dragging the marker with the mouse. Q can be
entered on the Q setup box. Right-clicking the marker portion
returns the GAIN to 0dB.

4 EQ (EQualizer) button

Turns on and off the equalizer. When the EQ button is turned
on, it lights in green.

5 Frequency setup box

Set the frequency in 1/3-octave steps in the frequency ranges
of 25 Hz to 100 Hz and 14 Hz to 20 kHz. Set it in 1/12-octave
steps in the range of 100 Hz to 14 kHz.

1

2

3

4

8

5

6

7

5

6

7

5

6

7

6 Q setup box

Set Q in the range of 0.15 to 22.

7 GAIN setup box

Set GAIN in 0.5-dB steps in the range of –15 dB to +15 dB.

8 HCF (High-cut Filter) button

This button allows you to turn on and off the 90 Hz high-cut
filter. Use the HCF function when you connect a sub woofer to
an output as a loud speaker. When the HCF is turned on, it
lights in green and the parametric equalizer band decreases by
one. (Applications that play only 5.1 channel audio signals
such as DVD, do not require the HCF.)