Sony DJ Equipment SRP-X700P User Manual

4

• The dedicated USB driver software is contained in the CD-ROM

supplied with the SRP-X700P.

• Install the dedicated USB driver software by following the

instructions shown on the screen. Some computer may reboot
when the dedicated USB driver software is installed.

1

Turn on the main power of the personal computer and start
Windows.

2

Insert the supplied CD-ROM into the CD-ROM drive of the
personal computer.

3

Turn on the main power of the SRP-X700P. Connect the
connector on the front or rear of the SRP-X700P to the USB
connector of the personal computer using a USB cable.

4

The USB device of the SRP-X700P is recognized and the
dialog box [This wizard searches for new drivers for:] appears.
Click [Next >].

5

Select [Search for the best driver for your device.
(Recommended).] and click [Next >]. (Fig. 1)

6

Click on the check box [Specify a location:] and click
[Browse...]. Specify [Driver] folder of the supplied CD-ROM
and click [Next >]. (Fig. 2)

7

When the screen [Windows driver file search for the device:]
appears, click [Next >].

8

When the screen [Windows has finished installing the software
that your new hardware device requires.] appears, click [Finish].

9

Because the USB port of the SRP-X700P is recognized as
[Unknown Device], click [Next >].

0

Select [Search for the best driver for your device.
(Recommended).] and click [Next >]. (Fig. 3)

qa

Click on the check box [Specify a location:] and click
[Browse...]. Specify [Driver] folder of the supplied CD-ROM
and click [Next >]. (Fig. 4)

qs

When the screen [Windows driver file search for the device:]
appears, click [Next >].

qd

When the screen [Windows has finished installing the software
that your new hardware device requires.] appears, click [Finish].

Installation of the dedicated USB driver software is now complete.

Select

Click

Click

Click on the 
check box

Fig. 1

Fig. 2

Select

Click

Click

Click on the 
check box

Fig. 3

Fig. 4