Sony DJ Equipment SRP-X700P User Manual
8
Names and Functions of Controls on Screen
1.1 BLOCK Screen
The BLOCK screen displays the setup status and the signal level according to the internal blocks in the SRP-X700P.
If you click a button, the screen jumps to the related setup screen. You can select ON/OFF and set parameters on each screen.
1 INPUT index
You can enter an index of each input channel. By entering the
name of the connected equipment as the index, you can easily
check the signal system when setting the parameters. You can
enter up to 8 alphanumeric characters.
name of the connected equipment as the index, you can easily
check the signal system when setting the parameters. You can
enter up to 8 alphanumeric characters.
2 TRIM button
The reference level of each input channel that is set on the
INPUT OVERVIEW screen appears on the TRIM buttons.
INPUT OVERVIEW screen appears on the TRIM buttons.
3 Input level meter
Displays the input signal level of each input channel.
4 LCF (Low-Cut Filter) button
When you turn on the LCF button, it lights in green.
5 PEQ (Parametric EQualizer) button
When you turn on the PEQ button, it lights in green.
6 FR (Feedback Reducer) button
When you turn on the FR button, it lights in green.
7 COMP (Compressor) button
When you turn on the COMP button, it lights in green.
8 INPUT fader display
Displays the setup value of the INPUT fader.
9 INPUT MUTING button
The INPUT MUTING button lights in red when muted.
0 INPUT VIDEO TYPE display
Displays the video input signal format of A to F of LINE4.
qa Setup.. button
The screen jumps to the ROUTING screen when this button is
pressed.
pressed.
qs AUTOMATIC MIXER button
The AUTOMATIC MIXER button lights in green while the
AUTOMATIC MIXER is in operation.
AUTOMATIC MIXER is in operation.
qd OUTPUT MUTING button
The OUTPUT MUTING button lights in red when muted.
qf OUTPUT fader display
Displays the setup value of the OUTPUT fader.
qg EQ (EQualizer) button
When you turn on the EQ button, it lights in green.
qh DELAY button
When you turn on the DELAY button, it lights in green.
qj Output level meter
Displays the output signal level of each output channel.
qk REF LEVEL button
Displays the reference level of each output channel on the
button that is set on the OUTPUT OVERVIEW screen.
button that is set on the OUTPUT OVERVIEW screen.
ql ATT (ATTenuator) button
Displays the output ATT level to the internal power amplifier.
w; OUTPUT index
You can enter an index of each output channel. You can enter
up to 8 alphanumeric characters.
up to 8 alphanumeric characters.
wa CLIP indicator
The CLIP indicator lights in red when the internal power
amplifier starts clipping. Adjust the output level using wf ATT
so that the CLIP indicator does not turn on frequently.
amplifier starts clipping. Adjust the output level using wf ATT
so that the CLIP indicator does not turn on frequently.
ws PROTECTION indicator
The PROTECTION indicator lights in red when the power
amplifier protection circuit operates.
amplifier protection circuit operates.
1
ws
wa
2
0
ql
qs
w;
4
3
56 7 8 9
qa
qd qfqg qh
qj qk