Sierra Wireless RAVEN 1X 20070914 User Manual
Global Positioning System (GPS)
Rev 3.0B Feb.08
88
Local Host
To set the PinPoint X to report to a local host, one directly
connected to the serial port, configure the port to be used with
S53 ‐ Destination Port. The local IP address will automatically
be used for local reports. S53, in AceManager, is part of the
Misc group.
connected to the serial port, configure the port to be used with
S53 ‐ Destination Port. The local IP address will automatically
be used for local reports. S53, in AceManager, is part of the
Misc group.
Figure 10-3: AceManager : Misc - S53 Port
If you need to send reports to additional local ports, you can
specify other ports with *PPLATSEXTRA. Local Reports can be
sent to up to 7 additional ports consecutively following the S53
port. If S53=1000 and *PPLATSEXTRA=4, reports will be sent
to 1000, 1001, 1002, 1003, and 1004. In PPLATSEXTRA, specify
the number of ports where you want the reports sent, 0 to 7 (0
disables extra ports).
specify other ports with *PPLATSEXTRA. Local Reports can be
sent to up to 7 additional ports consecutively following the S53
port. If S53=1000 and *PPLATSEXTRA=4, reports will be sent
to 1000, 1001, 1002, 1003, and 1004. In PPLATSEXTRA, specify
the number of ports where you want the reports sent, 0 to 7 (0
disables extra ports).
Figure 10-4: AceManager : PinPoint - *PPLATSEXTRA
TCP GPS Report Polling
The PinPoint X can easily and quickly be polled for location by
opening a TCP connection to port 9494 (default). Once the
connection is established, the PinPoint X will send a report
with the current position using the GPS report type the
modem is configured to use.
opening a TCP connection to port 9494 (default). Once the
connection is established, the PinPoint X will send a report
with the current position using the GPS report type the
modem is configured to use.
You can change the port for the TCP GPS poll using
*PPTCPPOLL.
*PPTCPPOLL.