Sierra Wireless RAVEN 1X 20070914 User Manual

Configuration Commands

Rev 3.0B Feb.08

141

Note: It may take up to 30 seconds for the hardware module to
respond after CONNECT is output.

*CSX1=n

PassThru Echo : Echo data to the host.

•

n=0 : Data will be passed to the host.

•

n=1 : PASSTHRU mode will echo all host received data
and will not pass the data to the modem while the modem
is not asserting DCD.

Note: If the modem is asserting DCD, data will be passed from the
host to the modem as it normally is when *CSX1=0.

*PTINIT=string

Any AT Command string to be passed to the OEM module
before entering PASSTHRU mode, e.g. AT&S1V1, etc.

•

string=AT command(s)

*PTREFRESH=n

Number of minutes of inactivity in PASSTHRU mode to
resend the *PTINIT string to the hardware module.

•

n=0 : Disabled

•

n=1‐255 minutes

*RESETPERIOD=n

In PASSTHRU mode, modem will be reset after this period if
no data has been sent or received. Value is in hours.

•

n=0 : Disabled

•

n=1‐255 hours

SMTP

SMTP (Simple Mail Transfer Protocol) is the de facto standard
for email transmission across the Internet. The PinPoint X can
send messages using SMTP if it has been configured to use a
mail server.

Note: You cannot send an Email with your PinPoint X unless the
Email server you have configured allows your PinPoint X as a relay
host. Talk to your network administrator to ensure you can send email
through the email server using your PinPoint X.