Sierra Wireless RAVEN 1X 20070914 User Manual

Page of 203
Configuration Commands
Rev 3.0B Feb.08
 
154
*PPIP=d.d.d.d
IP address where GPS reports are sent (ATS Server IP). Also 
see *PPPORT. 
d.d.d.d=IP address
Example: 
AT*PPIP=192.100.100.100
*PPLATS=n
Local ATS ‐ Causes GPS reports to also be sent out the serial or 
Ethernet link every n seconds, when there is a PPP connection 
to the serial host or a connection to the Ethernet port is estab‐
lished. 
n=0 : Disable
n=1‐255 seconds
Tip:  Sends to the PPP peer IP S110 with the Destination Port number 
S53.
*PPLATSEXTRA=n
Have local ATS reporting (LATS) send up to 7 extra copies of a 
GPS report to the subsequent ports. 
n=0 : Just the original report is sent (default).
n=1‐7 : Send GPS report copies to that number of ports.
Example: If AT*PPLATSEXTRA=7 and the port in S53 is 1000, 
then GPS reports will be sent to ports 1000‐1008. 
*PPLATSR=n
Indicates the type of GPS report to send to the local client 
(PPP/SLIP peer). See *PPGPSR. 
n=0x11 : Standard GPS Report 
n=0x12 : Standard GPS Report + UTC Date
n=0x13 : Standard GPS Report + UTC Date + RF data
n=0xE0 : GGA and VTG NMEA reports
n=0xE1 : GGA, VTG and RMC NMEA reports
n=0xF0 : TAIP reports
n=0xF1 : Compact TAIP data
*PPMAXRETRIES=n
Maximum number retries when in Simple Reliable Mode. 
n=0 : Disabled
n=1‐255 retries