Sierra Wireless RAVEN 1X 20070914 User Manual
Hardware Installation of the PinPoint X
Rev 3.0B Feb.08
25
The I/O port can use an optional I/O harness available through
Sierra Wireless.
Sierra Wireless.
Indicator Lights
When your PinPoint X is connected to power and an antenna,
there is a specific pattern to the lights to indicate its operation
mode.
there is a specific pattern to the lights to indicate its operation
mode.
Figure 4-8: PinPoint X Indicator lights
•
Network ‐ Indicates a successful connection to the cellular
network with an IP address given and a channel acquired.
network with an IP address given and a channel acquired.
•
Signal ‐ Light shows the strength of the signal and may be
nearly solid (strong signal) or flashing (weaker signal). A
slow flash indicates a very weak signal.
nearly solid (strong signal) or flashing (weaker signal). A
slow flash indicates a very weak signal.
•
Activity ‐ Lights will flash as data is transferred to and
from the PinPoint modem on the remote network.
from the PinPoint modem on the remote network.
•
Service ‐ Indicates when the connection is HSDPA or
UMTS. Unlit indicates EDGE or GPRS.
UMTS. Unlit indicates EDGE or GPRS.
•
GPS ‐ Indicates a GPS fix. When lit, the PinPoint X has
GPS coordinates to report.
GPS coordinates to report.
•
Power ‐ Indicates the power adapter is connected and
there is power getting to the PinPoint X.
there is power getting to the PinPoint X.
RSSI LED Ranges
RSSI/Signal LED Status
Ranges of RSSI (dBm)
On Solid
Equal to or stronger than -69
Fast Blink
-70 to -79
Normal blink
-80 to -89
Slow Blink
-90 to -99
Extinguished
Equal to or weaker than -100