Siemens AC75 User Manual
AC75 AT Command Set
15.1 AT^SRSA
s
AC75_ATC_V01.002
Page 418 of 569
10/30/06
Confidential / Released
15.1
AT^SRSA Remote SIM Access Activation
The
write command enables and disables RSA connections and allows to control the AC75's SIM
usage scheme.
The
read command requests the current RSA status. Every line indicates an RSA connection, if any.
Syntax
Unsolicited Result Code
^SRSA:
,
This URC is generated if either the SIM usage scheme or the SAP connection status has changed due to SAP
message communication or AT command control.
Parameter Description
Activation result
0
0
No Error
Parameters valid, SAP mode change initiated. However, actual mode change
is signaled via URC "
Other values indicate invalid activation requests, no SAP mode change is initi-
ated in the following cases:
1
Error unspecified.
2
Error activation command is busy.
3
Error activation started with serial multiplex mode is off.
4
Error activation started on invalid serial multiplex channel.
5
Error device Id is already known.
6
Error SAP mode is already active.
7
Error invalid parameter.
Test Command
AT^SRSA=?
Response(s)
^SRSA:
(list of supported
s) , (list of supported
s) , (list of supported
s) , (list
of supported
s) , (list of supported
s) , (list of supported
s)
OK
Read Command
AT^SRSA?
Response(s)
]
OK
Write Command
Response(s)
^SRSA:
OK
Reference(s)
PIN
ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge
4
Last
SIEMENS
-
+
+
+
+
+
+
-
-
-
<actResult>
(num)