Siemens Camera Accessories 6AU1900-1AB32-0BA0 User Manual
Functions
4.3 Fixed point
CamTool
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
4-5
4.3.3
Change fixed point position
Requirements
The cam is opened with SIMOTION CamTool.
Change fixed point position
To change the position of a fixed point:
1. Select the fixed point in the S diagram (distance diagram). The position of the fixed point
1. Select the fixed point in the S diagram (distance diagram). The position of the fixed point
shown in the tooltip.
2. Move the fixed point with drag&drop to the new position.
or
1. Double-click the fixed point. The Fixed Point Properties window appears.
2. Enter the new x- or y-position of the fixed point in the Position tab and click OK. The
or
1. Double-click the fixed point. The Fixed Point Properties window appears.
2. Enter the new x- or y-position of the fixed point in the Position tab and click OK. The
representation of the fixed point in the diagram will be updated and displayed at the new
position.
4.3.4
Changing the velocity at the position of a fixed point:
Requirements
The cam is opened with SIMOTION CamTool.
Change velocity at fixed point
To change the velocity at the fixed point position:
1. The velocity at a fixed point position is represented by a handle in the V diagram (velocity
1. The velocity at a fixed point position is represented by a handle in the V diagram (velocity
diagram).
Select the handle. The mouse pointer shows the direction in which you can move the
Select the handle. The mouse pointer shows the direction in which you can move the
handle.
2. Move the handle with drag&drop to the new position.
or
1. Double-click the fixed point. The Fixed Point Properties window appears.
2. Enter the new velocity as specified in the following table in the Dynamic response tab and
or
1. Double-click the fixed point. The Fixed Point Properties window appears.
2. Enter the new velocity as specified in the following table in the Dynamic response tab and
click OK. The handle in the V diagram (velocity diagram) is shown at the new position.