Siemens Camera Accessories 6AU1900-1AB32-0BA0 User Manual
Functions
4.4 Straight line
CamTool
4-10
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
4.4.4
Changing the velocity along a straight line
Requirements
The cam is opened with SIMOTION CamTool.
Change velocity along a straight line
To change the velocity along a straight line:
1. The velocity along a straight line is represented by a line in the V diagram (velocity
1. The velocity along a straight line is represented by a line in the V diagram (velocity
diagram).
Select the line. The mouse pointer shows the direction in which you can move the line.
Select the line. The mouse pointer shows the direction in which you can move the line.
2. Move the line with drag&drop to the new position. The S diagram (distance diagram) is
automatically adjusted.
Figure 4-5
Changing the velocity along a straight line
or
1. Double-click the straight line. The Straight Line Properties window appears.
2. Enter the new velocity in the Dynamic response tab and click OK. The line in the V
1. Double-click the straight line. The Straight Line Properties window appears.
2. Enter the new velocity in the Dynamic response tab and click OK. The line in the V
diagram (velocity diagram) is shown at the new position. The S diagram (distance
diagram) is automatically adjusted.
Notice
To specify an absolute slave velocity, you must select an absolute master velocity for
To specify an absolute slave velocity, you must select an absolute master velocity for
calculations in the Simulation Settings window.