Sekonic L-398M User Manual
3. Using Exposure Multipliers (-2, -1, +1, +2)
Exposure multiplier indications are provided at both sides of the
Exposure multiplier indications are provided at both sides of the
marks of the dial scale. Use the -1 or -2 mark when desir
ing to cut the exposure to 1!2 of 1!4 and +1 or +2 mark to multiply the exposure by 2 or 4.
Set the appropriate mark, instead of the or, to the dial scale value.
Set the appropriate mark, instead of the or, to the dial scale value.
EMPLOYING SPECIAL ACCESSORIES
1. Direct Reading Slides
A total of 11 slides are available, all of which may be used together with the Lumisphere
and Lumidisc. (Note that they cannot be used with Lumigrid.) The High slide, as
mentioned previously, is employed for varying the measuring range in 2 steps (high and
low illumination), however, it can also be used for direct reading. The other slides are
specialized for direct reading and cannot be used for mode selection.
and Lumidisc. (Note that they cannot be used with Lumigrid.) The High slide, as
mentioned previously, is employed for varying the measuring range in 2 steps (high and
low illumination), however, it can also be used for direct reading. The other slides are
specialized for direct reading and cannot be used for mode selection.
15