Roberts Radio 63I User Manual

1.  To disable a single alarm enter the alarm setup menu (see page 96) and 

press the Menu Up or Down buttons until the desired alarm is highlighted 
on the display. Press the Select button.

2. Press 

the 

Menu Up or Down buttons until the 'Enable:' option is highlighted 

on the display. Press the Select button.

3. Press 

the 

Menu Up or Down buttons to highlight 'Off' and press the Select 

button.

4. Press 

the 

Menu Up or Down buttons until the 'Save' option is highlighted 

on the display then press the Select button to save the new setting.

 

The chosen alarm will now be disabled.

When your radio is in standby the alarms can be controlled using the Alarm 
button. This avoids the risk of disturbance to someone who is asleep.

1.  To change the states of the alarms when in standby press the Alarm button. 

The display will cycle through none, either and both alarms enabled.

1.  The buzzer or radio alarm can be silenced for 5 minutes by pressing the 

Alarm button. Should you wish for a longer snooze duration this can be 
extended. Pressing the Alarm button again while the radio is snoozed will 
set the available snooze time to 5, 10, 15 or 30 minutes.

2.  While the snooze timer is active the remaining snooze time is shown next 

to the fl ashing alarm icon on the clock display.

3.  In order to cancel the Snooze timer while the alarm is suspended, press 

the  On/Standby  button. The display will briefl y show an 'Alarm Off' 
message.

1-4

1-4

1-4

3

1

1