Presonus Audio electronic 26x26 FireWire Recording System User Manual

 

20 

•  Below the two tabs is the Router Preset section. You will see a Default button, 

which sets the Router to a default state with all DAW returns routed to their 
respective outputs (ie; DAW 1/2 out of analog 1/2, etc). The user can save any 
routing scheme to any of the six presets by clicking on Save and then on the 
number they wish to save to.  

 

•  Below the Router Preset buttons are the source selectors for the Main Output, 

and the headphone outputs (1 headphone output is on the front panel of the 
FIRESTUDIO, the other 2 are on the optional MSR remote). These outputs 
mirror the hardware outputs, so you can monitor what is outputting from any 
given output pair (ie. quickly check a headphone mix you created for someone 
else). 

 

•  You can quickly audition any output pair through the main output or any of the 

headphone outputs. 

 

o

 

For example, click on the word ‘Main’ and you will see it highlight in 
blue. Now drag the mouse over any output pair to see a grey box with 
the word ‘Main’ on it over the given output pair. Left-click to audition 
what is being routed to that output through the Main output, and 
double-left-click to assign the Main output to mirror that output pair.  

 

•  At the bottom of the window are the tracks for each hardware output pair. The 

Track Elements are identical to the assigned audio source except for LINK and