Philips CF-U1 User Manual

A peripheral device does not work.

z

Install the driver.

z

Contact the manufacturer of the device.

z

When operation resumes from standby or hibernation, devices such as a 
mouse may not function properly. In this case, restart the computer or 
reinitialize the device.

z

When   is displayed in the Device Manager, remove and insert the device. If 
the problem persists, restart the computer.

z

The computer may not recognize the connection/removal of some devices, or 
may not operate normally with some devices.
Operate the following steps.

A

Click [start] - [Control Panel] - [Performance and Maintenance] - 
[System] - [Hardware] - [Device Manager].

B

Select the device and remove the check mark for [Allow the computer 
to turn off this device to save power.] in [Power Management]. (This 
item may be unavailable for some types of devices.)

The connected mouse does not work.

z

Check the mouse connection.

USB floppy disk drive does not work 
as a boot drive.

z

You can use only the Panasonic CF-VFDU03U USB floppy disk drive (optional).

z

Connect the floppy disk drive directly to a USB port of the computer. Do not 
connect it via a USB hub or USB connector of the Cradle or the Mini Dock. 

z

Set [Legacy USB support] to [Enabled] in the [Advanced] menu of the Setup 
Utility (

z

Set [Boot Option #1] in [Boot] menu of the Setup Utility to [USB FDD Disk]. 
(

z

Turn off the computer and connect the USB floppy disk drive, and then restart 
the computer.

You do not know the address map for 
IRQ, I/O port address, etc.

z

To check the current address map, click [start] - [Control Panel] - [Performance 
and Maintenance] - [System] - [Hardware] - [Device Manager] - [View] - 
[Resources by type].

Cannot print.

z

Check the printer connection.

z

Turn on the printer.

z

The printer is not online.

z

No paper is in the printer tray or there is a paper jam.

z

Turn on the printer and connect it to the computer, and then restart the 
computer.

„