Paslode Nail Gun IM250A User Manual

16

Open the cover by pressing slightly above the adapter and
pivoting the cover open. The air filter simply lifts out.

Tap the filter GENTLY to remove any dust. Check and clean
the air filter every two days. Soap and water restores the
filter to a "like new" condition.

These simple steps are based on maintaining the safety and
operational efficiency of the Paslode  Angled Finish  Nailer.

Before you leave the work site:

1.

 Remove battery and store in tool case. Always use the
Paslode  Angled Finish  Nailer case for transporting and
storing the tool.

2.

Dispose of all empty fuel cells. Remember to dispose of
these cells where they will not be crushed, punctured,
burned or found by children.

When you get home:

1.

 Place the battery in its charger if it needs charging as
indicated by the red charge light on the handle.

2.

Wipe your Paslode  Angled Finish  Nailer with a clean,
soft cloth.

3.

Remove and clean the filter every two days.

4.

Check work contacting element to ensure it  is operating
freely.

A variety of accessories are available for the Paslode
Angled Finish Nailer:

Extra battery allows use of one battery  while spare battery
is being charged.

Cuts glare while affording eye protection.

Contact your Paslode

®

 representative for additional

information.

A 9/64 Hex Socket Wrench (Part No. 900736) is provided
with each Paslode Angled Finish Nailer.

COVER

FILTER

CAP