TP-LINK TL-SC3430N User Manual
43
z
SMTP: Select if SMTP authentication is necessary for sending e-mail.
z
POP before SMTP: Select if POP before SMTP authentication is necessary for sending e-mail.
9
POP server name: It is necessary when the POP before SMTP is selected in
Authentication. Type the POP (receiving mail) server name up to 64 characters, or type
the IP address of the POP server. This setting is necessary when the SMTP server which
sends e-mails performs authentication using the POP user account.
Authentication. Type the POP (receiving mail) server name up to 64 characters, or type
the IP address of the POP server. This setting is necessary when the SMTP server which
sends e-mails performs authentication using the POP user account.
9
User name, Password: Type the user name and password of the user who has the mail
account. This setting is necessary when the SMTP server which sends e-mails performs
authentication.
account. This setting is necessary when the SMTP server which sends e-mails performs
authentication.
¾
Recipient E-mail Address: Type the recipient e-Mail address up to 64 characters. You can specify
up to three recipient E-mail addresses.
up to three recipient E-mail addresses.
¾
Administrator E-mail Address: Type the Administrator e-Mail address up to 64 characters. This
address is used for reply mail and sending system messages from the SMTP server.
address is used for reply mail and sending system messages from the SMTP server.
¾
Subject: Type the subject/title of the e-Mail up to 64 characters. With respect to mail which is sent
according to the IP notification.
according to the IP notification.
¾
Message: Type the text of the E-mail up to 384 characters. Default value provides network
information including IP, Port, MAC, Model, Firmware Version and Web Version.
information including IP, Port, MAC, Model, Firmware Version and Web Version.
6.3.7 Wireless
The wireless network has to be set up by using cable network connection. After setting the Camera
correctly, the wireless function can work without cable network connection. Wireless settings must be the
same as the access point or ad-hoc device. When changing the settings they should always be made
first in the Camera and then in the wireless access point. This ensures that the Camera is always
accessible when making changes.
correctly, the wireless function can work without cable network connection. Wireless settings must be the
same as the access point or ad-hoc device. When changing the settings they should always be made
first in the Camera and then in the wireless access point. This ensures that the Camera is always
accessible when making changes.