Panasonic Attune II Installation Guide

13

 External control output [DEVICE]

This external control output is used for alerts.
Using this unit’s settings, this connector is controlled in 
response to the reception of alert signals from the All-In-
One Headsets or Belt Packs and to the signals from the 
alert input.

 Alert input [ALERT]

This external input connector is used for alerts. It is 
connected to a sensor or other external device.

 Serial port [RS-232C]

This port is for controlling the system from a personal 
computer. 
For details, contact the store where you purchased this 
unit.

 Video output [VIDEO OUT]

This NTSC type of composite connector is for outputting 
camera images.
For details, contact the store where you purchased this 
unit.

  Network port [10BASE-T/100BASE-TX]

This is connected to a 10BASE-T or 100BASE-TX 
network, and it connects the Network Camera with the 
Center Module.



wSide panel

  Reset button

Press this button using a fine-tipped object when this unit 
is not operating properly to restart this unit.

  SD card slot

This is where an SD card is inserted.

   SD card access LED

This indicates the status of the SD card access. While the 
SD card is being accessed, it blinks in green.



p While the SD card access LED is blinking, do not 

eject the SD card, disconnect the power plug or press 
the reset button. Performing any of these actions may 
destroy the data on the card.