Team Products PMD8137 User Manual

Maintenance
Clean the drill regularly. Before cleaning, remove the battery pack and any 

accessories (bits etc.). To clean, use ONLY a mild soap and damp cloth on the 

housing. Never immerse drill in any kind of fluid. Do not use any solvents or 

harsh abrasives on the drill housing as this may cause damage to the unit.  

Always keep the ventilation openings clear. 
NOTE: All bearings in these tools are lubricated with a sufficient amount of 

high-grade lubricant for the life of the unit under normal operating conditions. 

No further lubrications required.
CAUTION: DO NOT keep the trigger switch pressed in with tape or any other 

permanent means or the circuit will not function properly. A malfunction may 

result possibly causing overheating or damage to the unit.
Do not open the drill, battery or battery charger. There are no user serviceable 

parts. Opening the unit will void the warranty.

TROUBLESHOOTING TIPS:
DRILL DOES NOT WORK?
• Recharge the battery 
CHARGING INDICATOR LED NOT ILLUMINATED DURING RECHARGING?
• Check that battery pack is properly connected to the battery charger
• Check that the AC Adaptor is properly connected at both ends

SPECIFICATIONS 
Voltage 

18V

Speed 1 

0-400RPM

Speed 2 

0-1100RPM

Torque Settings 

24 + Drill

Chuck Capacity 

up to 3/8”

Charger Input 

120V AC 60Hz

Charging Time 

Approx. 1 Hour

Battery Type 

Ni-Cad

QUESTIONS?
If you have any questions about this product, please contact our Customer  

Service Department at (888) 231-4022, 9 am to 5 pm EST, Monday through  

Friday or visit our website at: www.colemanpower.com.

7

8