Tascam DR-07 User Manual
TASCAM DR-07
15
Removing the SD card
1. Make sure the unit power is off.
2. Press the inserted SD card in gently and it
will disengage from the unit so that you can
pull it out completely.
pull it out completely.
CAUTION
Do not remove the SD card during recording or
playback, or when the unit is connected to the
computer by USB. Be sure to turn off the unit’s
power before removing the card.
playback, or when the unit is connected to the
computer by USB. Be sure to turn off the unit’s
power before removing the card.
Inserting a new card
The following pop-up screen appears if you insert
a new card in the unit.
a new card in the unit.
Press the ¥/π key to format the card so that it can
be used with this unit.
When formatting finishes, the Home Screen appears.
be used with this unit.
When formatting finishes, the Home Screen appears.
Other cases that require formatting
• The above “
FORMAT ERROR
” screen also
appears if you install an SD card that was for-
matted by a device other than the DR-07. Reformat
the card to use it with this unit.
2–Preparation