Tascam DR-07 User Manual
54
TASCAM DR-07
8–Recording
MID
or
HIGH
. (See “Setting the MIC input func-
tions” on page 50.)
TIP
In addition to adjusting the
•
REC LEVEL
volume, try changing the distance and angle
between the microphone and the sound
source.
To record the sound of a source most effec-
To record the sound of a source most effec-
•
tively and accurately, point the front of the
DR-07’s built-in mics toward the sound source
with the LCD facing up.
An easy way to set the input level is to raise
An easy way to set the input level is to raise
•
it until the PEAK indicator lights while
inputting as loud a noise as you expect to
record. When the PEAK indicator lights,
record. When the PEAK indicator lights,
lower the input level until it no longer lights.
NOTE
Press STOP/HOME to end recording standby.
Recording
Before starting the following operation procedures,
input selection and level adjustment should be
completed, and the Home Screen should be open.
completed, and the Home Screen should be open.
1 Press
RECORD
to begin recording standby.
The screen shows the recording file name,
the input source, the recording audio
file type and sampling frequency. Please
confirm that these are as desired before
starting recording.
file type and sampling frequency. Please
confirm that these are as desired before
starting recording.